BayRaider; cheap cockpit tent

Swallow Boats Forum

* Home | Help | Login | Register
+  Swallow Boats Forum
|-+  Swallow Boats Forum
| |-+  Technical
| | |-+  BayRaider; cheap cockpit tent
« previous next »
Pages: [1] Print
Author Topic: BayRaider; cheap cockpit tent  (Read 6199 times)
Craic
Guest


Email
BayRaider; cheap cockpit tent
« on: February 08, 2009, 02:16:11 pm »

A simple and cheap solution for a cockpit tent, in connection with the sprayhood.:
1. Bring gaff down horizontally, tie gaff to mizzen mast, tie boom to gaff.

2. Spread plain 3 x 4 plastic cover over gaff, use bungees to tie cover to longholes in railing.

3. Looks agreeable from outside.

4. Comfy sealed to front and dry inside.

Cost of materials: 12 Euros.


* gaff_horiz_921.jpg (48.09 KB, 540x405 - viewed 1285 times.)

* cockpittent_hook_921.jpg (33.59 KB, 540x433 - viewed 1237 times.)

* cockpittent_outs_921.jpg (46.61 KB, 540x405 - viewed 1244 times.)

* cockpittent_outs_921.jpg (46.61 KB, 540x405 - viewed 1236 times.)
Logged
Craic
Guest


Email
Re: BayRaider; cheap cockpit tent
« Reply #1 on: February 08, 2009, 02:18:41 pm »

OOPS,
wrong photo. Here is photo from inside, apologies for the dirt.:


* cockpittent_ins_921.jpg (33.39 KB, 540x405 - viewed 1235 times.)
Logged
Tony
Sr. Member
****
Posts: 278


Re: BayRaider; cheap cockpit tent
« Reply #2 on: February 14, 2009, 01:58:15 pm »

Hi, Claus.
        I\\\'ve been using a similar idea for a couple of years now quite successfully.  The main differences are as follows:-
1.My cockpit is shorter than the BR\\\'s so I do not need the boom and yard as a ridge pole.  Instead, I have the forward edge of the tarp bowsed down tight over the edge of the spray hood, using 3mm braid instead of shock cord to tie the corners to small bull noses screwed to the rubbing strip. Braced against the elasticity of the sprayhood frame it makes a gale proof seal, even on a mooring, head to wind.

2.At the ridge of the “tent”, about 20 cm from the mizzen mast, I have another length of braid tied as a noose over a golf ball pushed into the tarp from the inside. The ball gives a large surface to spread the load as this braid is tensioned hard and tied around the mizzen about 10 cm above the top of the ridge. The remaining length of the tarp can be fastened around the mizzen mast for a weather proof seal, or, more often, left open for ventilation. The exact position of the golf ball can be moved back to have some of the cockpit uncovered if  desired. Not a good idea in rain, as water runs down the side decks into the covered area.

3.The sides of the “tent” overlap the gunnel, nearly reaching the rubbing strip, to which they are attached in a couple of places with string and plastic bull noses, all easily done from inside the cockpit when afloat or, with the exception of the golf ball, from ground level when on the road and using the boat as a caravan. (Note: When towing the boat, unballasted, and making an overnight stop I have to keep it hitched to the car, otherwise, with 12 stone - ok , 13 stone - in the cockpit, the whole boat tips up, upsetting both stove and crew!)

4.Having the tarp outside the gunnels does not look as smart as your set-up. Less like a cockpit tent and more like someone has just thrown a tarp over the boat ( Doh!) but it has the advantage that rain on the outside and condensation on the inside are both directed over the side  keeping all inside dry. I\\\'ll perhaps post some photos when the weather gets better – but, as a tent it is functional rather than pleasing on the eye!
Logged

David
Full Member
***
Posts: 24


Re: BayRaider; cheap cockpit tent
« Reply #3 on: May 29, 2009, 05:21:15 pm »

Here is a boat tent I adapted out of cheap tunnel tent. The poles are fibreglass and tend get broken. Some one suggested I use 10mm dia plastic pipe instead. Though the tent feels secure when erected, I am not so sure if its a tent for an exposed anchorage.

David


* Boat Tent 2.jpg (1129.19 KB, 2816x2112 - viewed 1301 times.)

* Boat Tent 1.jpg (1173.71 KB, 2816x2112 - viewed 1185 times.)
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Swallow Boats Forum | Powered by SMF 1.0.8 & Mambo-SMF.
© 2001-2005, Lewis Media. All Rights Reserved.
Valid XHTML 1.0! Valid CSS!